1. Head restraint

2. A tray (from the passenger, behind an exception Venov)

3. Covers of eyes of fastening

4. Seat

1. Get a tray from under a seat.

2. Remove overlays of guides of a seat. Slips fasten on latches or uvulas.

3. At removal remember an installation site of each slip, consider that the slip is strongly fixed and it is necessary to remove it carefully not to break fastening.

4. Disconnect the battery from weight and sockets of wires of a seat (if seats are equipped with heating). Previously be convinced that wires belong to seat electric equipment.

5. Displace a seat forward and turn off back bolts of fastening, then turn off forward bolts, having displaced a seat back.

6. Remove a seat. It is not recommended to sort seats independently.

7. Installation is carried out upside-down.

On these cars the seat fastens to a floor through separate knot of a suspension bracket.

1. It is recommended to remove at first a seat, and then a seat suspension bracket framework, having turned off 4 bolts.

2. Get a tray from under a seat.

3. Remove overlays of guides of a seat. Slips fasten on latches or uvulas.

4. At removal remember an installation site of each slip, consider that the slip is strongly fixed and it is necessary to remove it carefully not to break fastening.

5. Disconnect the battery from weight and sockets of wires of a seat (if seats are equipped with heating). Previously be convinced that wires belong to seat electric equipment.

6. Displace a seat forward and turn off back bolts of fastening, then turn off forward bolts, having displaced a seat back.

7. Remove a seat. It is not recommended to sort seats independently.

8. It is forbidden to sort a framework or to regulate it.

9. Installation is carried out upside-down.

10. At installation tighten bolts of fastening of a framework of a suspension bracket with m 45 N.' moment.