The door is regulated in 6 directions.

At the correct adjustment the panel of a door has to be aflush with adjacent panels of a body.

The provision of a door along a surface of a body is regulated by its movement at the released bolts of fastening of loops to a body.

Vystupany doors over a surface of a body it is regulated at the released bolts of fastening of loops to a door.

Reliability of locking of a door is defined by the provision of a clamp of the lock of a door.

The manufacturer provided also installation of adjusting plates under a clamp.

At the correct adjustment the door should not be displaced up or down at a zakhlopyvaniye.

1. For adjustment of a clamp release screws (at the left) of fastening by an impact driver (these screws are tightened hardly (on the right – an adjusting plate)).

2. Then move a clamp and close a door, keeping the external handle in the unlocking situation.

3. Tighten screws when locking a door a latch (the latch uvula at the same time comes into a clamp).

4. At the correct adjustment of a door the clamp is regulated only in the horizontal direction.