1. Back cross facing

2. Back overlay of an upholstery of a ceiling

3. Overlay of forward powder

4. Right side panel

5. Arm

6. Overlay of back powder

7, 10. Covers of fastening of a belt

8. Lower slip

9. Handle

11. Belt guide

12. Sealant

13. Top overlay of an average rack

14. Belt guide

15. Handle

16. Overlay of a window

17. Anchor plate of a back belt

18. Facing of a back belt

19. Arm of a lamp of illumination of a back compartment

20. Overlay of a mudguard

21. Facing of the loudspeaker

(1) – direction of installation of a latch

1. Overlay of forward powder

2, 16. Doorway fringing

3. Handle

4, 8. Forward overlay of an upholstery of a ceiling

5. Overlay of a forward rack

6. Mirror

7. Antisolar peak

9. Right side panel

10. Loudspeaker

11. Overlay of an average rack

12. Cover of a natyazhitel of a seat belt

13. Back facing panel

14. Anchor plate of a forward belt

15. Anchor plate of a back belt

17. Facing of a window

18. Back overlay of an upholstery of a ceiling

19. Lower overlay of a back rack

1, 5. Overlays of powder

2, 6, 18. Doorway fringing (aperture of a back cover)

3. Overlay of a forward rack

4. Right side panel

7, 10. Overlays of an average rack

8. Handle

9, 16. Bolt of fastening of a belt

11. Cover of a natyazhitel of a seat belt

12. Loudspeaker

13, 14, 15. Back side facing panels

17. Overlay of a rack of the right sidewall

19. Overlay of a back rack

1, 7. Overlays of powder

2, 8, 23. Doorway fringing (aperture of a back cover)

3. Side panel

4, 10, 11. Handle

5, 12, 22. Overlay of an upholstery of a ceiling

6. Overlay of a forward rack

9, 14. Overlays of an average rack

13, 20. Bolt of fastening of a belt

15. Cover of a natyazhitel of a seat belt

16. Loudspeaker

17, 19, 24. Back side facing panels

21. Overlay of a rack of a back sidewall

These panels fasten screws or special latches. For removal of latches execute the following.

1. The cross screw-driver press the central core of a latch approximately on 2 mm (no more!).

2. Get a latch, having pulled on themselves.

3. At removal remove at first all panels which edges close the necessary panel, then remove the panel.

4. At installation of a latch press a core so that it was aflush with a sealant.