1.8.6.2. Seat belt of a back seat


Central seat belt
Adjustment

1. Before fastening
2. Buckle
3. Pull
4. When fastening
5. Buckle
6. Pull
Length of the central seat belt can be adjusted, having established a belt and a buckle at right angle to each other, and then having pulled a belt.

Never use one lower seat belt for fastening of several people.

The buckle and latch of the central seat belt of a back seat are marked with the word CENTER. Check existence of this mark in a buckle and a latch before fastening.

Locks of side seat belts and uvula of a buckle of the central seat belt will not approach to each other.

Office for storage of a seat belt under the second seat

When the seat belt is not used, store it in special office of a back seat. In order that the seat belt was included into office, curtail it around a buckle.

Office for storage of a seat belt under the third seat (if it is established)

When the seat belt is not used, store it as it is shown in the drawing.

Lengthening of a seat belt
Seat belt extender
If the seat belt is too short, it is possible to buy the seat belt extender. It can be used on any of front seats. It needs to be used, only if the available seat belt is too short. If in its use there is no need, the extender needs to be removed as it can interfere with operation of the emergency tightening device.

Prevention
If you can use a usual seat belt, then you should not use the extender. If it is not necessary to you, but you will use it, you can be traumatized in case of accident.