1.8.4. Unfolding of seats


Lobbies and back seats

PERFORMANCE ORDER
1. Supporting the put seat, disconnect a hook from the handle.
2. After you slowly lowered a seat, strongly press it to fix it on the place.

Prevention
After you disconnected a hook, turn seats, and legs will automatically decay.

3. Pull the adjusting rychazhok located sideways seats and lift a back.

Prevention
Make sure that legs of a seat decayed. If they did not decay automatically, spread out them hands.
After you put a seat or established it in initial situation, slightly pull a seatback back and forth to check whether the seat is well fixed.


Type 1 (seats with manual adjustment)
PERFORMANCE ORDER
1. Remove head restraints from front seats and insert them into openings for storage which are located in the lower part of a back seat.


2. Completely cast away a back of a back seat back.


3. Having put backs of front seats, shift front seats completely forward.


4. Completely cast away backs of front seats.

Type 2 (a seat with automatic adjustment)
PERFORMANCE ORDER


1. Remove head restraints from front seats and insert them into openings for storage which are located in the lower part of a back seat.


2. Completely cast away a back of a back seat back.


3. Cast away a back of a front seat so that it adjoined to a pillow of a back seat.


4. Move a front seat completely forward and cast away a back up to the end. The front passenger seat can be spread out as well as driver's.

Prevention
At first cast away a seatback, and then move a seat forward. If the seatback is in vertical position, then the seat cannot be shifted forward completely.
To return the spread-out seat to initial situation, lift a back of a front seat. The seat will automatically move on 9 cm.
Be careful and do not pinch a hand or a leg.

Return of seats to initial situation
Lift backs of front seats and a back of a back seat, insert head restraints on the places.

Prevention
You do not drive the car if seatbacks are cast completely away.
To spread out seats, first of all park the car in the safe place.
You do not go on seatbacks if they are cast completely away.
To check that seats are reliably fixed, try to spread out or put seats.

The third seat (if that is provided) and back seat
PERFORMANCE ORDER


1. Shift front seats completely forward.


2. Remove a head restraint from the third seat and insert it into openings for storage. Then press the adjusting lever and put a seatback forward.


3. Pull the adjusting lever up and cast away a seatback back.


4. Remove head restraints from a back seat and insert them into the openings for storage located in the lower part of a pillow of a seat. Lower a side part of a seatback, having pulled a clamp rychazhok up.


5. Shift a back seat completely forward.


6. Lift the lever to record a back seat.


7. Pull the lever and completely cast away a back of a back seat.

Prevention
If you throw back a back of a back seat, surely lower armrests, otherwise you can damage them.

8. To return seats to a starting position, return backs of the second and third seats in initial situation, then establish head restraints.

Prevention
Do not drive the car when seatbacks are completely lowered.
Completely to lower seatbacks, park the car in the safe place.
You do not go on seats after their backs were lowered.
To check that seatbacks are reliably fixed, try to lower them or to lift.