1.29. Heater / conditioner
Control panel
1. Fan switch
2. Handle of adjustment of temperature
3. Handle of switching of the mode
4. The lever of switching of the arriving air
5. The conditioner switch (if it is established)
Change of speed of operation of the fan
The fan can work at various speeds (when the key in the lock of ignition is turned in position of ON). Choose desirable speed by means of the adjustment handle. At turn of the handle in position of OFF the heater and the conditioner does not work.
Change of temperature
Choose desirable temperature, turning the handle to the left or to the right.
The turn of the handle does the arriving air warmer to the right.
Prevention
When temperature of cooling liquid of the engine low, temperature of the arriving air changes even if to turn the adjustment handle up to the end to the right.
|
Change of an operating mode
For change of that from where air will come to salon, turn the switching handle.
Air comes only to the top part of interior of the car.
Air comes generally to the top part of salon and, partially, to the lower part.
Air comes generally to the lower part of salon and, partially, to the top part.
Air comes only to the lower part of interior of the car.
Air comes to the lower part of salon, on a windshield and on glasses of doors.
Air arrives only on a windshield and on glasses of doors.
The choice of the arriving air
During the work of system of heating and the conditioner it is possible to choose what air needs to be used, – from salon or arriving outside of the car. This adjustment is carried out with the help the lever of the choice of the arriving air.
Prevention
Install the lever in the provision of $ at movement along the dusty road or if you want to lift / reduce quickly temperature in salon. If to leave the lever in this situation during a long period, glasses can mist over.
|