OFF – screen wipers are switched off

INT – faltering work of screen wipers

1 – slow work of screen wipers

2 – bystry work of screen wipers.

1. Quickly

2. Slowly

3. Adjusting handle

Screen wipers of a windshield can be included by means of the lever of inclusion of screen wipers when the key in the lock of ignition is in position of ON or ASSORTMENT.

OFF – screen wipers are switched off

INT – faltering work of screen wipers

1 – slow work of screen wipers

2 – bystry work of screen wipers.

1. Quickly

2. Slowly

3. Adjusting handle

On cars with system of adjustment of the faltering movement of screen wipers the interval of their work can be changed from 2 to 15 with, rotating the adjusting handle.

Turn the handle on yourself to increase work intervals.

Clear brushes of screen wipers and glass of the car soft detergent to remove an oil film from glass and to ensure good functioning of screen wipers, without scratch and breakthroughs.

Prevention Before killing the engine, always switch off screen wipers and wait until they return to a starting position, especially at cold weather. If not to return screen wipers to parking situation, and to leave on glass, then in case they freeze to a windshield, the engine of screen wipers can be damaged at its following start. Before inclusion of screen wipers in cold weather check that they did not freeze to a windshield. If to include screen wipers in such conditions, the engine of screen wipers can fuse. Do not include screen wipers when glass dry: they can scratch glass. It can also result in premature wear of brushes. Replace brushes of screen wipers when they wear out in order that visibility of the road to rainy weather did not decrease. Use brushes of the suitable size. If you have questions, address experts.