1.33.1. An arrangement of a spare wheel, a jack and tools in the car


Arrangement of a spare wheel, jack and tools in the car

1. Spare wheel
2. Office for tools
3. Jack
4. Jack handle

The jack and the handle of a jack are stored in office for tools under a back seat.
Tools are stored in office for tools on outer side of a back door.

Jack

1. Fixing nut

Open a cover.
Turn off a fixing nut and get a jack.

Jack handle


Get the jack handle from a clip and get it from office for tools.
1. Holder


Having pressed the springing ring, get the handle.


Having pressed on the springing ring, collect the handle.

Tools

1. Office for tools
2. Flat-nose pliers
3. A key of the top hatch (for cars with the top hatch)
4. Screw-driver
5. Gaykovert
6. Lomik
7. Small lamp
8. A key for removal of the cap closing nuts of fastening of a wheel
9. Wrench (big)
10. Wrench (small)

Spare wheel

1. Lomik
2. Gaykovert

The spare wheel is installed on вня the shny side of a back door.
In some models, for prevention of theft, one of bolts of fastening of wheels has the small lock.


To remove the lock, insert a key into a crack of the lock and remove it from a bolt.
Turn off bolts of fastening of a spare wheel by means of a gaykovert.

Insert ломик into openings of a gaykovert when untwisting bolts of fastening of a wheel.
Remove a spare wheel


When on a hook (1) there is no spare wheel, pull out a hook and lift it up in a special opening for its storage.


For installation of the removed wheel.
Lower a hook of fastening of a spare wheel and establish on it the removed wheel.
Combine openings for bolts in a wheel with openings on a fixing arm and insert bolts of fastening of a spare wheel.

Prevention
Before installation of a wheel of the car on a fixing arm of a spare wheel, check that the hook of fastening of a spare wheel was lowered.


By means of a gaykovert tighten bolts of fastening of a wheel.
For installation of the lock on one of bolts, put the lock with the inserted key on a bolt head as it is possible further. Then, close the lock, having got from it a key.

Prevention
The spare wheel has to be reliably fixed at the movement of the car. At installation of a spare wheel instead of the lowered wheel, establish the lowered wheel on an arm of fastening of a spare wheel and reliably put the fixing clamps.

Poddomkrachivaniye and replacement of a wheel
Points of installation of a jack

A. Forward point of installation of a jack

If raising of the car at installation of a jack in a point And is not enough, use a point of Century.

C. Back point of installation of a jack

Before installation of the car on a jack, put the car on the parking brake.
On cars with the mechanical transmission transfer the gear shifting lever to the provision of neutral transfer. On cars with the automatic transmission include parking transfer P and turn a key in the ignition lock in position of LOCK.

Establish a jack under one of the points for installation of a jack shown in the drawing.
Use a point of installation of a jack, the next to the replaced wheel, or to a wheel on which it is necessary to establish chains for improvement of coupling with the road.

Prevention
Check that the jack was established on a dense surface.