1. Vial of air

2. Inclination sensor

3. Ving of vertical adjustment

Adjustment of headlights needs to be carried out at observance of the following conditions:

– the car has to be installed on a plain surface;

– check headlights of head light for existence of a rust or malfunctions;

– the driver has to sit in the sitting, the fuel tank of the car has to be filled;

– shake the car up-down several times.

Check that the vial of air was precisely in the middle of a scale. If the bubble is not in the center, turn the screw of vertical adjustment so that the bubble stood in the center.

1. Central stone pine

2. Red mark

3. Screw of horizontal adjustment

4. The deviation indicator in the horizontal plane

Check that the red mark coincided with the central line. If the mark does not coincide with the central line, turn the screw of horizontal adjustment and establish a red mark so that it coincided with the central line.