1, 4. Forelock

2, 5. Koronchaty nut

3. Tips of drafts

6. Average draft

7, 13. Samopodzhimny nuts

8. Hairpin of fastening of the pendular lever

9, 12. Covers

10. Nuts

11. Coupling

14. Washer

15. Pendular lever

16. Plug

N – to replace at assembly

N – to replace at assembly

1, 4. Forelock

2, 5. Koronchaty nut

3. Tips of drafts

6. Sryaedny draft

7, 13. Samopodzhimny nuts

8. Hairpin and arm of fastening of the pendular lever

9, 12. Covers

10. Nuts

11. Coupling

14. Washer

15. Pendular lever

16. Plug

A. To grease with ZM ATD 8663 sealant or equivalent

Removal of a bipod is facilitated on the removed steering reducer.

1. Lift a front of the car and remove a wheel.

2. Rasshplintuyte also turn off a koronchaty nut of a finger, by means of a stripper to a vypressuyta a bipod finger from the central draft (it is forbidden to use a wedge-shaped shock stripper).

3. Turn off a koronchaty nut of a shaft of a bipod and press a bipod MB990809-01 stripper.

4. Establish a bipod upside-down.

5. Combine tags on a shaft and on a bipod.

6. Tighten a bipod nut with m 140 N.' moment.

7. Replace a cover of draft and the forelock, tighten a finger nut with m 40 N.' moment.