1. Disconnect the battery from weight.

2. Remove both casings of a steering column, disconnect wires and take aside.

3. Remove the ignition lock (fir-trees it is provided by a design).

4. A hacksaw cloth saw through flutes in srezny bolts and turn out bolts the screw-driver.

5. Remove the lock.

6. Installation is carried out upside-down.

7. When tightening bolts of the new lock continuously check its work as rotation of a key.

8. Tighten bolts at first by hand, and then a 6-faced key to an oblamyvaniye of heads of bolts.

9. Remove the lower facing of the forward panel of salon.

10. Remove both casings of a steering column.

11. Remove a lock illumination ring.

12. Transfer the ignition key to the provision of ASS, press on a side pin and get a drum of the lock of blocking of a wheel.

13. Installation is carried out upside-down.