13.17.7. Lamp of illumination of registration plate

Details of a lamp of illumination of back registration plate

1. Plafond
2. Lamp
3. Laying
4. Casing
5. Plug

1. Unscrew screws and remove a plafond.
2. Replace a lamp (the lamp gets from the holder).
3. To remove a lamp assembled execute the following.
4. Remove plafonds and lamps.
5. Remove laying.
6. Remove the internal panel of a door of a back compartment.
7. Disconnect the socket and turn off nuts of fastening of a casing of a lamp (on models 1992-98 of in addition wring out latches).
8. Remove a casing with a plug.
9. Assembly is carried out upside-down.