1. Cover

2. Speedometer cable

3. Guard of devices

1. Cap

2. Facing of a guard

3. Guard of devices

4. Adapter

5. Cable

6. Speed sensor

1. Disconnect a speedometer cable from the check point.

2. The flat tool carefully hook and uncover a guard of devices.

3. Unscrew screws in the lower part of a guard and a bolt in the top part.

4. Get a guard and disconnect a cable of a speedometer and a wire.

5. Remove a guard.

6. Installation is carried out upside-down.

1. Disconnect a speedometer cable from the check point.

2. The flat tool carefully hook and uncover a guard of devices.

3. Disconnect a cable of a speedometer and a wire.

4. Unscrew screws and get a guard.

5. Installation is carried out upside-down.

1. Disconnect a speedometer cable from the check point.

2. The flat tool carefully hook and uncover a guard of devices.

3. Unscrew screws and remove facing of a guard.

4. Unscrew 3 screws and remove a guard.

5. Disconnect wires (except 1992-93).

6. On cars of 1992-93 disconnect a speedometer cable at the check point, then give a cable on yourself, turn an adapter, release a clamp and get a cable adapter.

7. On cars of 1994-95 remove for what disconnect a wire from the sensor and turn out the sensor (the sensor is screwed in a check point case shaft).

8. Installation is carried out upside-down.