1. Pump socket

2. Sensor socket

3. Drain stopper

4. Filter

5. Guard

6. Ogranichitedny valve

7. Control valve

8. Hose of removal of vapors;

9. Collar

10. Pipe of a jellied mouth

11. Ventilating tube

12. Consolidation

13. Jellied mouth

14. Hose of high pressure

15. Return highway

16, 21. Tank

19. Fuel pump

20. Fuel level sensor

22. In 4-door option

23. In 2-door option

1, 15, 18. Hose of removal of vapors

2. Backpressure valve

3. Reducing valve

4, 17. Trap

5. Hose of high pressure

6. Hose of the return benzorovod

7 Pump socket

8. Socket of the fuel level sensor

9. Bolts

10. Tank

11. Stopper of a jellied mouth

12, 16. Pipe jellied mouths

13. Pipe assembled

14. Consolidation

19. Pump

20. Filter

21. Fuel level sensor

22. Guard

23. Plate

24. Drain stopper

25. Tank

1, 12, 14. Hose of removal of vapors

2. Reducing valve

3. Hose of high pressure

4. Hose of the return fuel pipe

5. Pump socket

6. Socket of the fuel level sensor

7. Tank

8. Stopper of a jellied mouth

9. Pipe of a jellied mouth

10, 13. Mouth tube assembled

11. Consolidation

15. Tank assembled

16. Filter

17. Fuel level sensor

18. Backpressure valve

19. Guard

20. Drain stopper

21. Tank

1. Disconnect the battery from weight.

2. Lift a back part of the car. remove wheels. Turn away a tank mouth, a drain stopper and merge gasoline.

3. Remove a mouth guard.

4. Accurately designate and disconnect all hoses from a tank.

5. Disconnect the socket of the fuel level sensor.

1. Install under a tank the cart with a jack, turn off nuts of fastening and lower a tank.

2. Install a tank upside-down. Tighten fastening nuts with m 27 N.' moment, a drain stopper – with m 16 N.' moment.

3. Attach hoses on the put tags.

4. After assembly be convinced of lack of leaks.

1. Execute a decompression of fuel system (see subsection 8.2.1).

2. Disconnect the battery from weight. Lift a back part of the car. remove wheels. Turn away a tank mouth, a drain stopper and merge gasoline.

3. Remove a mouth guard.

4. Accurately designate and disconnect all hoses and valves from a tank. Unscrew screws and remove a tank mouth pipe. Disconnect wires from the fuel pump and the sensor.

5. Disconnect hoses from the fuel pump. Remove pillows in the top part of a tank.

1. Install under a tank the cart with a jack, turn off nuts of fastening and lower a tank.

2. Install a tank upside-down.

3. Tighten fastening nuts with m 27 N.' moment, a drain stopper – with m 18 N.' moment.

4. Attach hoses to a tank and the pump on the put tags. After assembly be convinced of lack of leaks.

1. Disconnect the battery from weight. Disconnect from a wire tank.

2. Lift a back part of the car. remove wheels. Turn away a tank mouth, a drain stopper and merge gasoline.

3. Remove an arm of a side guard.

4. Accurately designate and disconnect all hoses from a tank.

5. Install under a tank the cart with a jack, turn off nuts of fastening and lower a tank.

6. Remove the fuel pump, the reducing valve, the fuel level sensor.

1. Install a tank upside-down.

2. Tighten fastening nuts with m 25–30 N.' moment,

3. Dress hoses so that they came on tubes on 25–30 mm.

4. At first screw a hose of the trunk main by hand, and then tighten with the moment 30–40 N. of m, without allowing twisting.

5. Fill in 1 l of gasoline in a tank and connect the battery to weight.

6. Start the engine and be convinced of lack of leaks.