10.3.2. Removal and installation of springs (1983-89)


Correct installation of bolts of an earring of a spring

PERFORMANCE ORDER
1. Remove back wheels, disconnect a cable of the emergency brake.
2. Substitute 2 jacks under the bridge, disconnect shock-absorbers from the bridge.
3. Turn off nuts of step-ladders, turn off and get bolts of a back earring and a forward bolt of a spring, remove a spring.
4. Installation is carried out upside-down.
5. Bolts of fastening of a spring have to be turned by heads outside.
6. Tighten nuts of step-ladders with m 100–120 N.' moment, a shock-absorber bolt – with m 18–25 N.' moment (after lowering of the car), a nut of a forward bolt of a spring – with 140 N.' moment of m, nuts of an earring of 45-60 N. of m.